Introduction
1. High degree of automation, ordinary skilled workers can operate independently through 2 days of training. One button start and stop greatly simplifies the operation process of the equipment.
2. The weld forming methods include spiral swing welding, spiral welding and straight welding.
3. The diameter of the clamping pipe of the equipment is 120mm to 800mm. If necessary, a larger diameter can be customized and the maximum welding length is 6 meters.
4. The special welding torch and welding cable reduce the resistance of wire feeding, so as to realize the stable wire feeding of the welding gun at the position of 6 meters after the wire end of the wire feeder.
5. The barrel welding wire is located behind the wire feeding mechanism and slides along with the wire feeder’s movement to ensure that the wire feeding is smooth and smooth. If the welding wire quality passes, there will be no broken wire, thereby reducing the equipment downtime.
6. Stop welding and intermittent welding. When a barrel of wire is used or the wire is broken or the wire is not smooth, the equipment stops, and points out on the top of the touch screen the problem of “filaments not smooth”, “drive alarm” and so on. And the equipment is equipped with high power horn and warning lamp to remind operator to solve the problem. Then continue welding according to the position of the breakpoint.
7. Full open welding parameter adjustment can separate the welding voltage and current (wire feeding speed) separately. Compared with the traditional welding machine, the welding speed can be automatically matched according to the voltage, so that the welding process can be more diversified.
8. The smoke exhaust device on the chuck side is designed and welded outwards from the chuck to reduce the damage of welding spatter and smoke to weld bead formation.10, the design of the equipment is fully fitted with the arc surfacing process of
the inner wall of the pipeline, so as to ensure that the arc welding process of the equipment can be embodied by 100% of the equipment.
Technical Parameter
| Welding length | 6000 mm |
| Welding inner | > = D150- 1500 |
| Welding outer | > = D170- 1600 |
| Wire diameter | 1.6/2.4/2.8/ |
| Maximum load | 5.0T |
